Equipped with a built-in electric heater in each tower, our APD series dehumidifying equipment are designed to make a small footprint. They are ideal solutions when space is a big concern. The APD series of air dehumidifying equipment are perfect for applications requiring a small volume dry air and are widely used in clean rooms and other facilities.
| Outlet dew point temperature (with pretreatment) |
-20 to -80°C at 1 atm |
|---|---|
| Outlet dew point temperature (without pretreatment) |
-20 to -60°C at 1 atm |
| Cycle time | 8 to 24 hours |
| Operating temperatures | 10 to 40°C |
| Priority control | Available |
| Energy-saving features | Extended pre-cooling/ post-warming process |
| Dry air purge | All cycles |
| Gaseous fluid | Compressed air |
| Explosion-proofing | Not available |
| Use of gases other than air | Possible depending on operating conditions |
| Regeneration pressure | Near-atmospheric pressure |
|---|---|
| Special feature of regeneration system | Internal electric heaters |
| Utilities | Engine power supply |
| Low dew point/ -60°C or lower |
Pre-cooler required |
| Service life of switching valve | Long |
| Noise | Very low |
| Footprint | Small |
